Faucet Manufacturer Direct From Foshan
Foshan DTE Sanitary Ware Co., Ltd — faucets only, since 2008. Six production lines, 1,200,000 units per year, OEM and ODM from 200 pieces, with certifications that clear customs in North America, Europe, and Australia without surprises.
Faucet Manufacturer Direct From Foshan
Foshan DTE Sanitary Ware Co., Ltd — faucets only, since 2008. Six production lines, 1,200,000 units per year, OEM and ODM from 200 pieces, with certifications that clear customs in North America, Europe, and Australia without surprises.
Faucet Manufacturer Direct From Jiangmen
Jiangmen Yunyang Trading Co., Ltd. — Specializing in faucet manufacturing since 2010. The company operates five production lines with an annual output of 1,500,000 units. Minimum order quantities for OEM and ODM orders start at just 200 units. The company holds the necessary certifications to ensure that its products clear customs in North America, Europe, and Australia without any issues.
Our Faucet Product Lines
Seven product categories, each with enough SKU depth to build a full catalog or fill a container with
a single product family.
Bathroom Sink Faucets
Brushed Nickel Bathroom Faucets
Built on brass gravity casting, finished in-house, and tested to 500,000 cycles — ready to list in your market.
Every unit ships with cUPC, CE, or WaterMark documentation as applicable. OEM customization starts at 200 pieces with in-house tooling, so your SKU development doesn't stall waiting on outside vendors.
Kitchen Faucet Sprayer
Matte Black Bathroom Faucets
PVD matte black bathroom faucets — brass body, molecular-bond finish, certified for North America, Europe, and Australia.
We apply matte black in-house using physical vapor deposition, not paint or powder coat. The finish holds in humid bathroom environments where cheaper alternatives fail within months — which means fewer returns and no warranty claims eating into your margin.
Pull Down Kitchen Faucets
Pull down kitchen faucets built on brass gravity casting — the highest-volume configuration in our kitchen line, engineered for zero-return performance across North American, European, and Australian markets.
High-arc spout, weighted counterbalance retraction, ceramic disc cartridge tested to 500,000 cycles. Available in 5 finishes with cUPC, CE, and WaterMark certification under one roof.
Single Handle Kitchen Faucets
Single lever control, ceramic disc cartridge, 500,000-cycle tested — the configuration that drives the most volume in residential kitchen hardware.
We've been manufacturing single handle kitchen faucets since 2008. Every body is brass gravity cast, CNC machined to ±0.05mm at the valve seat, and finished in-house. cUPC, CE, and WaterMark certified for North American, European, and Australian market entry.
Stainless Steel Bathroom Faucets
Corrosion-resistant, hygiene-compliant, built for commercial and healthcare sourcing. Formed stainless bodies, brushed or polished finish, certified for North America, Europe, and Australia.
Different manufacturing process from our brass line — and that difference is exactly why certain buyers specify it.
OEM and ODM from 200 Pieces — With In-House Tooling
The most common reason buyers switch faucet suppliers is that their current factory won’t move on customization without a 2,000-unit minimum and a 60-day tooling lead time. We built our OEM program around a different assumption.
200
Piece OEM MOQ
25-35
Days, New OEM Sample
15-20
Days, ODM Adaptation
Low MOQ Built for Market Testing
Our OEM MOQ starts at 200 pieces — low enough to run a market test, get feedback from your retail or distribution customers, and decide whether to scale without tying up capital in inventory you're not sure about. We can hold that MOQ because we maintain an in-house tooling room for brass casting dies and CNC fixtures.
In-House Tooling — No Outside Vendor Delays
When a tooling revision comes up, it doesn't go to an outside vendor and add two weeks to the timeline. Our engineering team handles it on the floor, which keeps the first-sample cycle at 25–35 days for new OEM designs and 15–20 days for ODM adaptations of existing catalog bodies.
15-Engineer R&D Team
Structural designers, tooling engineers, and a surface finishing specialist who manages PVD and plating process development. For buyers bringing a design brief or a reference sample, the workflow runs from brief to first sample without handoffs to outside parties.
Certification Extension — Not a Full Re-Cert
For buyers adapting an existing certified body to a new finish or handle configuration, we manage the certification extension documentation as part of the project. You don't run a full re-certification from scratch — which matters when you're trying to get a new SKU into a North American or Australian market on a defined timeline.
Private-Label Packaging on All Lines
Most of our OEM buyers run their own brand on the carton and documentation. We prepare the commercial invoice and packing list to match. If you're building a house brand in faucets, the infrastructure is already in place.
Why Distributors and Importers Switch to Us
Most buyers who contact us are already working with a faucet supplier. These are the specific gaps they describe when they explain why they’re looking.
MOQ That Fits a Real Buying Cycle
Standard catalog MOQ starts at 50 pieces per SKU. For buyers managing a wide SKU range across multiple product lines, that means you can reorder slow-moving items without waiting until you've accumulated enough volume to justify a container. Mixed-container orders are standard, not an exception.
Lead Times Quoted in Writing
Production lead time is confirmed on the pro forma invoice, not estimated verbally and revised later. For in-stock items, lead time is 7–10 days to container loading. For production orders, 30–45 days depending on finish and volume. If something changes, you hear about it before it affects your shipment date.
Pre-Shipment Inspection Access
We support third-party pre-shipment inspection on every order. SGS, Bureau Veritas, Intertek — your choice of inspector. We provide the inspection checklist and coordinate factory access. Buyers who run their own QC program can send their own inspector. We don't restrict access or require advance notice beyond 48 hours.
English-Speaking Export Team
Your account manager handles quotation, sample coordination, production updates, and shipping documentation in English. No translation layer between you and the person who knows the order status. Response time on email is within one business day; urgent issues are handled same day via WhatsApp or WeChat.
FOB, CIF, and DDP Available
Production lead time is confirmed on the pro forma invoice, not estimated verbally and revised later. For in-stock items, lead time is 7–10 days to container loading. For production orders, 30–45 days depending on finish and volume. If something changes, you hear about it before it affects your shipment date.
Pre-Shipment Inspection Access
We support third-party pre-shipment inspection on every order. SGS, Bureau Veritas, Intertek — your choice of inspector. We provide the inspection checklist and coordinate factory access. Buyers who run their own QC program can send their own inspector. We don't restrict access or require advance notice beyond 48 hours.
Multi-Market Certification Under One Roof
Sourcing faucets for North America, Europe, and Australia from separate factories is a supply chain management problem that compounds over time — different lead times, different documentation formats, different QC standards, and three sets of supplier relationships to maintain.
We hold cUPC for North America, CE for Europe, and WaterMark for Australia — all from the same facility and the same production lines.
The practical effect: your North American, European, and Australian orders ship with the correct compliance documentation from one factory, on one production schedule, with one point of contact. Your customs broker gets the same documentation format on every container. Your compliance team isn’t chasing certificates from three different suppliers before a product launch.
NORTH AMERICA
cUPC
IAPMO-certified. Required for plumbing fixture sales across the US and Canada.
EUROPE
CE
Conformité Européenne marking. Covers EU market entry requirements for sanitary fittings.
AUSTRALIA
WaterMark
SAI Global WaterMark. Mandatory for plumbing products sold in the Australian market.
1 Factory
All three certifications from one production facility
1 Schedule
Multi-market orders on a single production timeline
1 Contact
One point of contact for documentation across all markets
Surface Finishing Controlled In-House Across Five Finishes
We run chrome, brushed nickel, matte black, PVD gold, and oil-rubbed bronze on our own finishing lines — no subcontracting. For buyers placing mixed-finish orders, that means finish consistency across SKUs is controlled by one team running one set of process parameters, not coordinated across three outside vendors with different bath chemistry and different QC standards.
Chrome & Brushed Nickel
Both lines run a copper/nickel/chrome electroplating stack. The nickel mid-coat carries the corrosion resistance — skipping it is a common cost-cutting move in the industry, and it’s why chrome faucets from some factories fail salt spray at 48 hours. Our chrome passes 24-hour salt spray as a minimum, with most batches clearing 48 hours.
PVD Gold
The PVD line runs 0.3–0.5μm coating thickness with cross-cut adhesion testing on every batch before parts move to assembly. Finish failures caught at the plating stage don’t delay your shipment the way a late-stage rejection would.
Matte Black & Oil-Rubbed Bronze
Both decorative finishes run on dedicated lines with controlled process parameters. Mixed-finish orders across all five finishes ship from one facility with consistent QC documentation.
Five Finishes, One Production Facility
Chrome
Cu/Ni/Cr electroplating stack. 24-hr salt spray minimum; most batches clear 48 hr.
Brushed Nickel
Same Cu/Ni/Cr stack with brushed surface treatment. Nickel mid-coat retained for full corrosion resistance.
Matte Black
Dedicated finishing line. Consistent flat black across mixed-SKU orders.
PVD Gold
0.3–0.5μm PVD coating. Cross-cut adhesion test on every batch before assembly release.
Oil-Rubbed Bronze
Dedicated line with controlled process parameters. Consistent tone across batch runs.
Why In-House Finishing Matters for Mixed-Finish Orders
When finishing is subcontracted across multiple vendors, each vendor runs different bath chemistry and different QC standards. Matching a brushed nickel across three outside vendors for a single product launch is a coordination problem that introduces variation you can’t fully control.
Running all five finishes in-house means one team, one set of process parameters, and one QC gate before parts move to assembly. Finish failures caught at the plating stage don’t delay your shipment the way a late-stage rejection would.
No subcontractor coordination for mixed-finish orders
Finish consistency across SKUs controlled by one team
Plating-stage QC catches failures before assembly — not at final inspection
Chrome: nickel mid-coat retained — no cost-cutting on corrosion resistance
PVD: 0.3–0.5μm thickness with cross-cut adhesion testing on every batch
The Production Infrastructure Behind Your Order
Six dedicated assembly lines, each configured for a specific product family — kitchen faucets, bathroom faucets, shower valves, concealed systems, filter faucets, and components. Keeping lines product-specific means your 3,000-unit kitchen faucet order runs on the kitchen line from start to finish without sharing floor time with a shower valve run.
12,000 m² Facility, 6 Production Lines
1,200,000 units annual capacity, so your order doesn't queue behind a larger buyer's rush.
Brass Gravity Casting, C36000-Equivalent Alloy
In-house casting and trimming, valve seat threads held to ±0.05mm tolerance on CNC machining.
500,000-Cycle Endurance Testing on Every Production Batch
Not just new product introductions — the cartridge performance your sample showed is what your container delivers.
150 Employees, 12 Dedicated QC Inspectors
XRF lead content testing on every incoming brass batch, three in-process inspection checkpoints, leak test at 0.6 MPa on every outgoing unit.
ISO 9001:2015, CE, cUPC, WaterMark, SGS
Documentation prepared in parallel with production, travels with the shipment.
1.2M
Units annual capacity
±0.05mm
CNC valve seat tolerance
500K
Cycle endurance per batch
0.6 MPa
Leak test on every unit
Lead Times
Catalog items
OEM orders with new tooling
Container packing is calculated against 20GP and 40HQ floor plans — we provide CBM and gross weight per SKU before you confirm the order, so your freight forwarder can quote accurately.
Markets Where Faucet Sourcing Generates Repeatable Revenue
Our order book spans five distinct buyer segments. Each has different order patterns, documentation requirements, and margin profiles — the detail below is meant to help you identify where your business fits and what to expect from the relationship.
Predictable Reorder Cycles, Consistent Documentation
Distributors stocking for wholesale supply to plumbers and contractors are our largest buyer segment. The order pattern is predictable: an initial container to establish inventory, then reorders every 8–12 weeks as stock turns. The documentation consistency we maintain — same HS codes, same test reports, same packing specs on every reorder — means your warehouse and customs broker aren't solving new problems every time a container arrives.
Most of our distributor accounts have been reordering for 3 years or more.
Finish and Dimensional Consistency Across Production Runs
Retail buyers sourcing private-label or OEM faucets for their own brand programs need a factory that can hold finish and dimensional consistency across multiple production runs. A brushed nickel faucet from your Q1 container needs to match the brushed nickel faucet from your Q3 container — same color, same surface texture, same packaging.
We run the same bath chemistry and the same process parameters on every run, and we keep production records by batch so any variation can be traced and corrected before it reaches your shelf.
Consolidate Multi-Category Project Sourcing to One Supplier
Renovation-focused distributors and specification-channel buyers — those supplying architects, designers, and contractors on project work — tend to order across multiple product categories per project: kitchen faucets, bathroom faucets, concealed shower systems, and components in a single container. Our category breadth means you can consolidate that sourcing to one supplier and one container, rather than coordinating three factories and three shipments for one project cycle.
Concealed shower systems and premium finishes (PVD gold, matte black) are the highest-margin SKUs in this channel.
Dedicated Faucets for RO Systems and Under-Sink Filtration Units
Companies selling RO systems, under-sink filtration units, and water treatment equipment need a dedicated faucet that ships with their system. Our water filter and RO faucet category covers air-gap and non-air-gap configurations, stainless and brass bodies, and multiple finish options — so the faucet matches the system aesthetically and meets the lead-free requirements for drinking water contact in your target market.
OEM labeling and custom packaging are standard for this segment. This is one of the faster-growing segments in our order book — worth building out if you're already in the water treatment space.
Consistent Product Across Multi-Phase Projects
Hotels, commercial property developers, and hospitality supply distributors order in volume and on project timelines. The key requirements in this segment are finish durability, documentation for specification compliance, and the ability to supply consistent product across multiple project phases — a hotel chain renovating 200 rooms needs the same faucet in room 1 and room 200.
Our 500,000-cycle endurance testing and batch-level QC records give your specification team the documentation they need to commit to a product across a multi-phase project. Sensor faucets and concealed shower systems are the highest-volume SKUs in this channel.
Compliance Infrastructure Already Built for Your Target Region
Buyers building a faucet line for a new export market — Southeast Asia, the Middle East, Australia — need a factory that already holds the relevant certifications and understands the documentation requirements for that market. We've been shipping to all five of our export regions since 2010. The compliance infrastructure is built; you're not asking us to figure out WaterMark or CE for the first time.
For buyers new to a product category, we can suggest a starter SKU mix based on what's moving for our existing distributors in that region.
EXPLORE BY CATEGORY
Find the Right Product Line for Your Market
Start the Conversation
Send us your target SKUs, a reference product, or your volume expectations — we’ll come back with a detailed quote and a recommendation on which configuration fits your market best. Most new buyers start with a sample order to test with their own customers before committing to a container.
Sample Orders Welcome
Most new buyers start with a sample run to validate quality with their own customers before committing to a full container.
Configuration Guidance
We'll recommend which product configuration fits your target market best — based on your SKUs, volume, and certification requirements.
Detailed Quote
Share your target SKUs or a reference product and we'll return a detailed, itemised quote — no vague ballpark figures.
Volume Flexibility
OEM/ODM from 200 pieces. Whether you're testing a new line or filling a container, we scale to your order size.
